Matrix-III

General Info

Reader Matrx-III EH is designed for access control as a reader for proximity cards of EM-Marine and HID standard and transformation of the read card code into the code Dallas Touch Memory and Wiegand 26

Specifications

Identification cards: cards of Dallas Touch memory and HID standard Autodetection of card standard without additional settings

Distance of cards/keyfobs reading: 6-14 cm

Output protocol: Dallas Touch Memory and Wiegand 26 Remoteness of reader from controller in mode Dallas Touch Memory, up to 15 m Remoteness of reader from controller in mode Wiegand, up to 100 m

Confirmation of card reading: buzzer signal, two-color loght-emitting diode

Indication: internal and external

Curent voltage: 8-18 V DC Current consumption in card standby mode, not exceeding: 35 mA Relative humidity, not exceeding: 95%

Dimensions: 115x45x22 Operating temperature: from -40ºC to +50ºC

Reader Operation

Operation of reader without external indication management (internal indication): 1. Always, when there is no card in the reader field, red diode is on. 2. At the moment of swipe red diode if off, green diode turns on and the reader gives a short sound signal. 3. No color indication when there is no card in the reader field. External management with red, green light-emitting diodes and sound is performed by bridging to general contact. External indication may operate together with internal indication, i.e. external indication excludes only the channel meant for external management.